News,baojishi senjie Metal Co. , Ltd.

18
2020 - 08
Six factors affecting metal flow during extrusion of titanium alloy ma...Titanium rods and titanium alloy rod blanks have low thermal conductivity, which will cause a great temperature difference between the surface layer and the inner layer during hot extru...
18
2020 - 08
Quality inspection methods for titanium alloy forgings and TC4 titaniu...The existence of defects in TC4 titanium forgings will affect the processing quality or processing quality of the subsequent processes, and some will seriously affect the performance an...
18
2020 - 08
Analysis of Grinding Burn Mechanism of TA1 Titanium Rod, TC4 Titanium ...The existence of defects in TC4 titanium forgings will affect the processing quality or processing quality of the subsequent processes, and some will seriously affect the performance an...
18
2020 - 08
The application of titanium alloy welding technology in shipbuilding a...Titanium material has the characteristics of high specific strength, corrosion resistance of sea water and ocean atmosphere, non-magnetic, sound permeability, impact resistance and good...
18
2020 - 08
Development status of high-strength and high-elasticity titanium alloy...The elastic deformation capacity of metal materials is affected by the yield strength and elastic modulus, and the tensile linear elastic limit (ε0.2) is mostly less than 1%. The streng...
18
2020 - 08
Overview of composition design and development of TC4 titanium alloy The elastic deformation capacity of metal materials is affected by the yield strength and elastic modulus, and the tensile linear elastic limit (ε0.2) is mostly less than 1%. The streng...